|
|
|
|
|
|
|
|
|
|
|
|
|
This two piece kit includes a blemished Matrix Aerospace AR10 Lower Receiver, Upper Receiver, and AR10 Pins. Built by the same people and to the same specifications as the Ruger SSR762 rifle but without the Ruger price stamped on it! Don't worry about compatibility, as these three components are matched by Matrix.
SPECS:
- Semi-automatic AR10 lower receiver
- AR10 "DPMS pattern" upper built by Matrix Aerospace.
- Machined from mil-spec 7075 T-6 forged aluminum and 6061
- Super precise CNC machining
- Marked “7.62mm”
- Works with our AR10 parts kit. Otherwise these use the standard Armalite / CMMG AR10 parts, except for the take down and pivot pins, which are Matrix built. These receivers are designed to use high quality "P Mag" magazines
- Mil-spec MK3 Satin Black Finish
100% USA Made receivers and hand guard, with USA parts.
Please remember that because this is a lower receiver, after purchase you must email us a copy of an FFL for transfer. (Email: sales@chandlerhardwoods.com) Failure to do so means you will not receive the item and you will have to pay a 15% restocking fee. Please make sure that the FFL file is clear enough to be legible.
|
AR 15 Platform Lightweight 15″ Handguard
These are "in the white" or bare aluminum handguards, perfect for Cerakote or other custom finishes. Surface prep is usually required.
Bring back the feel of great fitting well machined hand guards that are 100% American made. CNC milled 6061 T6 extrusions give exceptional strength with a light weight, coming in at just 10 oz. Steel low profile barrel nut allows you to torque to exact specification--way better than that "little more" needed to align the standard barrel nuts.
With no need to buy a front hand guard plate, standard hand guards, barrel nut, delta ring, weld spring and snap ring, these units may actually save money! We know they save time and knuckles.
The continuous 1913 Mil-Spec top rail gives many places to mount traditional optics and sights while being vented to aid cooling and weight reduction.
Fully free-float design with Keymod attachment points allows placement of accessories or rails only where needed.
Includes a barrel nut and three hardened Allen screws for rock-solid alignment and hold with upper receiver.
Our nomenclature for this hand guard is "Foxtrot Lightweight" (or Lavi).
Please check your gas block against the dimensions listed below as some gas blocks are larger than others.
- Center line to top of gas channel is 1.000
- Gas channel width is 0.375
- Total from six o'clock position to top of gas channel is 1.600 inches.
- Inside Diameter of Keymod is 1.275.
"If you don't try us, we both lose money!"
|
This is a brand new Matrix Aerospace AR15 Lower Receiver. This lower is manufactured by the same company and to the same standard as the lower that is used by Ruger SR556 rifle. It just does not have Ruger name stamped on it. These lowers come with complete LPK that is NOT assembled to receiver.
Since the 1968 Gun Control Act you MUST provide a FFL in order to receive a lower receiver. Full transfer instructions are available here.
SPECS:
- Semi-auto AR15 lower receiver
- Machined from mil-spec 7075 T-6 forged aluminum
- Super precise CNC machining.
- Marked “Cal Multi”
- Works with standard AR15, 6.8, 300 blackout components and magazines
- Mil-spec Mk3 Satin Black Finish
100% USA Made lower and CMMG parts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is a brand new Matrix Aerospace AR10 Upper Receiver. Specifically machined to fit Matrix lower receivers. Built by the same people and to the same specifications as many of the world's largest arms manufactures. Super precise upper, but without the super high price!
"If you don't try us, we both lose money!"
SPECS:
Semi-auto AR10 Upper receiver
AR10 "DPMS pattern" upper built by Matrix Aero space.
Matrix 15" 16 TPI handguards are fit for this upper.
Machined from mil-spec 7075 T-6 forged aluminum
Super precise CNC machining.
Works with standard AR10 type and DPMS 16TPI parts.
Mil-spec MK3 Satin Black Finish
100% USA-Made upper!
|
Currently have units in stock.
This is a Matrix Aerospace 100% USA manufactured keymod free float hand guard with one Steel Barrel Nut and three screw side clamp shrouds included. This is NOT the crappy Chicom stuff out there for about the same price with Aluminium barrel nuts and screw on shroud. Hand guard will fit all standard mil spec (1 1/4 x 18 tpi) upper receivers. With Delta rings, plastic hand guards and front caps upwards of $32, just the savings in busted knuckles and damaged parts is worth the additional $17. And I guarantee you, that you will love the feel of quality machine work when it all goes together "just right". Please check your gas block against the dimensions listed below as some gas blocks are larger than others. ie Aluminium.
Matrix ships keymods with and with out logo. You may get a unit with NO Matrix logo.
15.0" length makes this $12.50 to ship so maybe it is best to ship with other parts? Plenty of room in the box!!
Specifications:
Barrel Nut is 1.25 inch x 18 TPI heat treated steel with four 1 3/16 flats to torque.
Torque to spec and gas tube clears low profile nut. No "extra" for alignment.
15" 6061 Aluminum
1913 Mil spec rail with 35 slots
12 Key mod openings on the 3, 6 and 9 o'clock positions.
Center line to top of gas channel is 1.000 Gas channel width is 0.375
Total from six o'clock position to top of gas channel is 1.600 inches.
Inside Diameter of Keymod is 1.275.
Relief cuts for weight reduction and heat dissipation.
Some Matrix products may not have logo.
Total weight of 12.9 oz including BBL nut and three hex head screws.
Mil Spec type 3 flat black finish.
|
First quality Matrix uppers!! Get them now while they are plentiful cuz who knows about tomarrow.
This is a brand new Matrix Aerospace M4 spec USA made AR15 M1913 7075 T6 cryo forged Upper Receiver. This Upper is manufactured by the same company and to the same standard as uppers used by Ruger SR556 rifle.
Note: Uppers sold to Dealers will not be assembled prior to shipping.
SPECS:
- Machined from mil-spec 7075 T-6 forged aluminum
- Super precise CNC machining.
- Works with all length standard AR15, 6.8, 300 blackout components.
- Mil-spec Mk3 Satin Black Finish
- M4 cuts done.
100%
USA Made Lower Receiver, Forward Assist and Ejection Port Cover parts.
***Due to having to use several forge companies to assure this item stays in stock , forge mark may vary***
|
|
|
