AR 15 Platform 9″ Foxtrot Keymod Hand Guard Blem
We don't inspect these after plating, so we cannot guarantee finish, but they are 100% functional. Priced at only $35.99, our loss is your gain.
100% American made. CNC milled 6061 T6 extrusions give exceptional strength with light weight at 8 oz. Steel low profile barrel nut allows you to torque to exact specification. With no need to buy a front hand guard plate, standard hand guards, barrel nut, delta ring, weld spring and snap ring at $35.99, these units may actually save money! (We know they save time and knuckles).
The continuous 1913 Mil-Spec top rail gives many places to mount traditional optics and sights. Hard-coat black anodized. Fully free-float design with KeyMod attachment points allows for the placement of accessories or rails only where needed.
Included are the three hardened allen screws needed for rock-solid alignment and hold with upper receiver. Please check your gas block against the dimensions listed below as some gas blocks are larger than others. (i.e. Aluminum).
- Barrel Nut is 1.25 inch x 18 TPI heat treated steel with four 1 3/16 flats to torque.
Torque to spec and gas tube clears low profile nut. No "extra" for alignment.
- 9" 6061 Aluminum
- 1913 Mil spec rail with 15 slots
8 Key mod openings on the 3, 6 and 9 o'clock positions.
- Center line to top of gas channel is 1.000"
- Gas channel width is 0.375"
- Total from six o'clock position to top of gas channel is 1.600"
- Inside Diameter of Keymod is 1.275.
- Relief cuts for weight reduction and heat dissipation.
- Total weight of 8.9 oz including BBL nut and three hex head screws.
- Mil Spec type 3 flat black finish.
Includes: Barrel nut and mounting hardware (three allen screws)
Matrix's MSRP for this model of handguard is $69. This 100% USA made hand guard is priced at only $35.99!! If you don't try us, we both lose money!!